Indian Standard Medium Weight Beam per IS 808 : 1989 — depth 450mm, flange width 150mm, web thickness 9.4mm, flange thickness 17.4mm, weight 72.4 kg/m.
| Property | About X-X Axis | About Y-Y Axis |
|---|---|---|
| Moment of Inertia (I) | 303,910,000 mm⁴ (30391.0 cm⁴) | 8,340,000 mm⁴ (834.0 cm⁴) |
| Elastic Section Modulus (Z) | 1,350,700 mm³ (1350.7 cm³) | 111,200 mm³ (111.2 cm³) |
| Plastic Section Modulus (Zp) | 1,573,000 mm³ (1573.0 cm³) | 176,300 mm³ (176.3 cm³) |
| Radius of Gyration (r) | 181.5 mm | 30.1 mm |
| Distance to Extreme Fibre (c) | 225.0 mm (d/2) | 75.0 mm (b/2) |
| Shape Factor (Zp/Z) | 1.165 | 1.585 |
| Torsional Constant (It) | 510,000 mm⁴ (51.0 cm⁴) | |
| Warping Constant (Iw) | 442,000,000,000 mm⁶ | |
| Polar Moment (Ip = Ix + Iy) | 312,250,000 mm⁴ (31225.0 cm⁴) | |
Useful for paint estimation, fire protection coating quantities, and section analysis:
Surface area calculated from full cross-section perimeter including flange tips. Shear area Av = d × tw per IS 800 : 2007 cl. 8.4. Surface/mass ratio used for estimating paint and fireproofing coverage per kg of steel.
Calculated per IS 800 : 2007 (limit state design) using partial safety factor γm0 = 1.10. Values assume the section is fully laterally restrained. Reduce for unsupported lengths per IS 800 cl. 8.2.
| Grade | Plastic Moment Mp (X-X) | Plastic Moment Mp (Y-Y) | Axial Capacity (Short) |
|---|---|---|---|
| E 250 | 357.5 kN·m | 40.1 kN·m | 2098 kN |
| E 350 | 500.5 kN·m | 56.1 kN·m | 2937 kN |
| E 410 | 586.3 kN·m | 65.7 kN·m | 3440 kN |
| E 450 | 643.5 kN·m | 72.1 kN·m | 3776 kN |
Mp = Zp × fy / γm0. Axial capacity = A × fy / γm0 for short, fully-restrained columns. For longer columns, apply slenderness reduction per IS 800 cl. 7.1.2.
| Standard | Equivalent Section | Depth | Weight |
|---|---|---|---|
| India (IS 808) | ISMB 450 | 450 mm | 72.4 kg/m |
| Europe (EN) | IPE 450 | — | — |
| UK (BS) | 457×152×52 UB | — | — |
| USA (ASTM) | W18×50 | — | — |
| Japan (JIS) | H 450×175 | — | — |
| Germany (DIN) | I 450 | — | — |
Equivalence based on closest matching depth and weight. Note that ISMB has tapered flanges (8° slope per IS 808) while IPE, UB, and W-shapes have parallel flanges. Always verify exact properties from the actual standard before substituting in design calculations.
| Grade | Yield (MPa) | UTS (MPa) | Elong. | Application |
|---|---|---|---|---|
| E250 (Fe 410W) | 250 | 410 | 23% | General construction |
| E275 (Fe 440) | 275 | 440 | 22% | Commercial buildings |
| E300 | 300 | 440 | 22% | Industrial structures |
| E350 (Fe 490) | 350 | 490 | 22% | Heavy industrial, bridges |
| E410 (Fe 540) | 410 | 540 | 20% | Heavy structural, offshore |
| E450 (Fe 570) | 450 | 570 | 20% | Bridges, towers |